The mover of choice...
e-go Platinum
...for big Aussie vans.

e-go Platinum

Manoeuvre big vans and trailers effortlessly with e-go Platinum electric remote control movers.

e-go Platinum delivers maximum manoeuvring power for tough Aussie caravans – it is the mover of choice for big dual-axle vans up to 3.5 tonnes. Unlike powered jockey wheels, it drives the wheels that carry most of a van’s weight, with obvious traction benefits on gradients and loose surfaces.

About

The Purple Line e-go caravan mover is a low profile, heavy duty caravan mover, constructed with anodized alloy components making it light weight and exceptionally resistant to corrosion. The e-go caravan mover is suitable for both single (up to 2.25 tonnes) and twin axle (up to 3.5 tonnes) caravans. The e-go has a more efficient, precision cut gearbox, which generates greater power whilst drawing less current. The e-go has a wind on engagement mechanism, which allows for micro-adjustments, which when combined with the better gearbox, make the e-go the caravan mover of choice for the heavier caravan.

The e-go caravan mover uses a wind on engagement mechanism, to move the rollers onto the tyres. The advantages of this mechanism are that it allows the operator to adjust the pressure applied to the tyres, increasing or decreasing as necessary when on sloping ground, when tread is worn or tyre pressure is low, when using on heavier caravans, etc.

There is an electric engagement upgrade you can get for the e-go caravan mover. This upgrade is designed to be retro fitted to the unit, so you can get this at the time of initial purchase or at a later date if required. With this system installed the rollers engage at the touch of a button, negating any requirement for physical effort at all.

The e-go caravan mover has the cross actuation feature, which enables both rollers to be engaged simulataneously from either side of the caravan.

The e-go caravan mover is water resistant, and to a certain extent waterproof, however it should not be operated when submerged.

The e-go can be used on a dual axle caravan with four motors, all synchronised to the one handset. Instructions on how to pair and synchronise the handset is contained within the user manual.

Features & Benefits

  • TUV approved and compliant with Australian standards. Carries the RCM
  • Corrosive resistant, electro plated and powder coated for enhanced durability and prolonged life
  • Best in class features and price
  • Direct drive gearbox
  • Solid cast alloy rollers for superior grip and durability. Rollers have a lifetime manufacturers warranty
  • Cross actuation allows both rollers to be engaged simultaneously from one side
  • Heavy duty design suitable for Australian single and twin axle caravans
  • 2 year parts warranty
  • Transferrable to a new or upgraded caravan

Safety Features

  • Isolation switch fitted to prevent accidental use of the remote
  • Unique double press on button on the handset to prevent accidental operation
  • Control unit and handset will shut down automatically after 60 seconds if the handset is not used in that time
  • Control unit will shut down if the mover is working constantly in one direction for 3 minutes
  • Built in motor overload protection (current and temperature) – no requirement for a fuse
  • Automatically braked immediately as soon as the handset button is released

Specification​

Designation : e-go

Operational Voltage : 12 Volt DC

Minimum Current Consumption : 25 Amps

Maximum Current Consumption : 76 Amps

Power Output : 585 kg

Speed : 12cm / sec.

Weight : 35kg (maximum)

Minimum Width (caravan/trailer) : 1800mm

Maximum Width (caravan/trailer) : 2400mm

Safe Working Load (SWL)

2250 kg (2 motors) :  up to 1.5 tonnes on a 25% incline

3500 kg (4 motors) : up to 2.5 tonnes on a 20% incline

FAQs

Is the ego suitable for tough Australian road conditions?
Yes, the ego is a sealed, anodised, alloy unit that is very tough and rugged, ideally suited to the demands of outback Australian roads.

Will the e-go fit my caravan?
Yes, adapter plates are available to ensure that the e-go fits all chassis types as long as the ground clearance is a minimum of 165mm – the e-go will drop down approximately 50mm from the chassis. Please contact us for further information.

Will the e-go fit on twin axle caravans?
The e-go is suitable for single and twin axle caravans.

Can I fit the e-go myself?
Please review the User Manual which may help you to decide if self-fit is an option, or contact us for further advice. Alternatively, please contact your dealer or a mobile fitter.

Does the e-go have soft start and stop?
It has precision control operation and provides excellent accuracy.

Where is the best location for the mover?
The best location for the e-go is in front of the axle. However if this is not possible it is usually possible to fit behind the axle.

Does it fit on a caravan with shock absorbers?
Yes.

Where do I find the serial numbers?
Location may vary. The image below shows the three possible locations of the serial number plate. Please note this before fitting to chassis.

Purpleline

Installation Video

Quattro Video

Mover Myths Dispelled

Caravan Mover Testimonial

Fitting to a European Caravan

User Manual

For Use With Model Numbers: EGO130 & EGO400

Useful Resources

For further product information view and download a range of useful resources.

e-go Editorial Feature

e-go Movers Brochure

Purpleline

Product Listing

e-go Platinum Two Motor
$1,699.00 inc. GST
e-go Platinum Four Motor
$3,199.00 inc. GST
Call Now Button