Australia's new benchmark...
e-go Titanium
...in caravan movers.

e-go Titanium​

e-go Titanium sets a new benchmark in affordable, top quality caravan movers. Fitted with the same alloy-bodied drive units as our top-of-the-range e-go models, they are amazing value.

You’ll be amazed at how easy it is to move your van. Whether squeezing it into a tight spot at home, or manoeuvring effortlessly around a caravan park, just engage the drives and you have total push-button control.

About Titanium

The Purple Line’s e-go Titanium caravan mover is a top of the range remote control caravan motor mover combining expert engineering with intelligent electrical technology to create one of the best movers on the market today.

Low profile, heavy duty caravan mover, constructed with anodized alloy components making it light weight and exceptionally resistant to corrosion. The e-go caravan mover is suitable for both single (up to 2.25 tonnes) and twin axle (up to 3 tonnes) caravans. The e-go has a more efficient, precision cut gearbox, which generates greater power whilst drawing less current.

The e-go Titanium caravan mover has the cross actuation feature, which enables both rollers to be engaged simulataneously from either side of the caravan.

This e-go caravan mover is water resistant, and to a certain extent waterproof, however it should not be operated when submerged.

The e-go Titanium can be used on a dual axle caravan with four motors, all synchronised to the one handset. Instructions on how to pair and synchronise the handset is contained within the user manual.

Features & Benefits

  • TUV approved and compliant with Australian standards. Carries the RCM
  • Corrosive resistant, electro plated and powder coated for enhanced durability and prolonged life
  • Best in class features and price
  • Direct drive gearbox
  • Solid cast alloy rollers for superior grip and durability. Rollers have a lifetime manufacturers warranty
  • Cross actuation allows both rollers to be engaged simultaneously from one side
  • Heavy duty design suitable for Australian single and twin axle caravans
  • 2 year parts warranty
  • Transferrable to a new or upgraded caravan

Safety Features

  • Isolation switch fitted to prevent accidental use of the remote
  • Unique double press on button on the handset to prevent accidental operation
  • Control unit and handset will shut down automatically after 60 seconds if the handset is not used in that time
  • Control unit will shut down if the mover is working constantly in one direction for 3 minutes
  • Built in motor overload protection (current and temperature) – no requirement for a fuse
  • Automatically braked immediately as soon as the handset button is released


Designation : e-go

Operational Voltage : 12 Volt DC

Minimum Current Consumption : 25 Amps

Maximum Current Consumption : 76 Amps

Power Output : 585 kg

Speed : 12cm / sec.

Weight : 35kg (maximum)

Minimum Width (caravan/trailer) : 1800mm

Maximum Width (caravan/trailer) : 2400mm

Safe Working Load (SWL)

2250 kg (2 motors) :  up to 1.5 tonnes on a 25% incline

3000 kg (4 motors) : up to 2.5 tonnes on a 20% incline


Is the ego suitable for tough Australian road conditions?
Yes, the ego is a sealed, anodised, alloy unit that is very tough and rugged, ideally suited to the demands of outback Australian roads.

Will the e-go fit my caravan?
Yes, adapter plates are available to ensure that the e-go fits all chassis types as long as the ground clearance is a minimum of 165mm – the e-go will drop down approximately 50mm from the chassis. Please contact us for further information.

Will the e-go fit on twin axle caravans?
The e-go is suitable for single and twin axle caravans.

Can I fit the e-go myself?
Please review the User Manual which may help you to decide if self-fit is an option, or contact us for further advice. Alternatively, please contact your dealer or a mobile fitter.

Does the e-go have soft start and stop?
It has precision control operation and provides excellent accuracy.

Where is the best location for the mover?
The best location for the e-go is in front of the axle. However if this is not possible it is usually possible to fit behind the axle.

Does it fit on a caravan with shock absorbers?

Where do I find the serial numbers?
Location may vary. The image below shows the three possible locations of the serial number plate. Please note this before fitting to chassis.


Installation Video

Quattro Video

Mover Myths Dispelled

Caravan Mover Testimonial

Fitting to a European Caravan

User Manual

For Use With Model Numbers: EGO130 & EGO400

Useful Resources

For further product information view and download a range of useful resources.

e-go Editorial Feature

e-go Titanium Four Motor
$2,898.00 inc. GST
e-go Titanium Two Motor
$1,499.00 inc. GST
Call Now Button